Product Overview
Produces Trapezoidal & Corrugated Roof Sheets
Our double‑layer roof panel roll forming machine is an all‑in‑one solution for metal roofing manufacturers. A single machine runs two different roof profiles: the upper station forms trapezoidal YX27‑259‑1036 panels, and the lower station forms YX18‑76‑988 corrugated sheets. This flexible equipment suits production for industrial warehouses, workshops, hangars and steel‑structured residential buildings.
Key Selling Points
✅ Two roof profiles from one machine: trapezoidal ASEANA RIB 2 + ASEANA 4FT corrugated sheet
✅ Accepts GI / PPGI Q345 coils, 0.3‑0.8 mm thickness, 1220 mm feed width
✅ Fully‑automatic Schneider‑Omron PLC control; length accuracy ±2 mm
✅ Production speed: 15‑25 m/min for high‑volume roof panel output
✅ Heavy‑duty H‑beam main frame; hardened Cr12MOV cutting blade
✅ 1‑year factory warranty; optional on‑site technical installation support
✅ Complete unit, ready for commissioning upon arrival
Raw Material & Profile Data


►Material:GI,PPGI Yield Strength: Q345
►Material Thickness: 0.3-0.8 mm
►Feeding Width: 1220mm
►Trapezoidal YX27-259-1036: Effictive Width 1036mm, Overall Width:1127mm
►Corrugated YX18-76-988: Effictive Width 988mm, Overall Width 1100mm
Machine Standard Configuration
|
No. |
Component Name |
Qty |
|
1 |
Hydraulic Decoiler With Car |
1 set |
|
2 |
Entry Roller+ Manual Pre-Shearing Device |
1 set |
|
3 |
Roll Forming System |
1 set |
|
4 |
Hydraulic Cutter |
1 set |
|
5 |
Product Support Frame |
1set |
|
6 |
PLC Control System |
1 set |
Technical parameters
|
Category |
Parameter Item |
Specification |
|
Whole Machine |
Overall Dimension(L×W×H) |
11 m × 1.9 m × 1.5 m |
|
Total Weight |
12.5 T |
|
|
Machine Paint Color |
Customizable |
|
|
Hydraulic Decoiler |
Max Coil Loading Capacity |
5 Tonnes |
|
Max Uncoiling Width |
1250 mm |
|
|
Coil Inner Diameter |
460‑530 mm |
|
|
Max Coil Outer Diameter |
1500 mm |
|
|
Decoiler Motor Power |
3 KW |
|
|
Roll Forming System |
Forming Speed |
15‑25 m/min |
|
Main Drive Motor |
7.5 KW, chain drive |
|
|
Upper Layer(Trapezoidal) Forming Stations |
18 stations |
|
|
Lower Layer(Corrugated) Forming Stations |
20 stations |
|
|
Shaft Diameter |
Φ75 mm / Φ90 mm |
|
|
Shaft Material |
40Cr alloy steel |
|
|
Roller Material |
45# carbon steel, precision‑machined, electroplated & polished |
|
|
Main Frame |
H400 H‑beam; side‑plate thickness:18 mm |
|
|
Hydraulic Cutter |
Hydraulic Motor Power |
4.0 KW |
|
Blade Material |
Cr12MOV, fully heat‑treated |
|
|
PLC Control System |
HMI Touch Screen / PLC / Relay / Inverter |
Schneider |
|
Length Measuring Encoder |
Omron |
|
|
Cutting Length Tolerance |
±2 mm |
|
|
Working Power Supply |
415 V, 50 Hz, 3‑phase(customizable) |
Customization Options
We engineer each production line to match factory layouts and output goals:
►Uncoiler Options: Manual uncoiler, hydraulic uncoiler or Hydraulic uncoiler With Car
►Automated Stacking: Magnetic or pneumatic automatic purlin stacking and bundling systems.
►Electrical Adaptability: Pre-wired for local plant power grids (380V/50Hz, 415V/50Hz, 460V/60Hz, etc.).
►Custom Service: We accept custom‑built machines according to customers' roof profile drawings or samples.
Global After-Sales
►Comprehensive Warranty: 12-month standard global warranty covering all primary mechanical components, hydraulic systems, and PLC hardware.
►On-Site Installation & Commissioning: Overseas service engineers are available for installation guidance, line commissioning, and operator training on-site.
►Fast Spare Parts Availability: Complete spare parts inventory maintained with fast international express dispatch for critical wearing parts.
►Quality Inspection
Mechanical Checks: Frame integrity, main shaft precision, roller dimensions, drive alignment, and gear mesh clearance.
Functional Checks: PLC sequence control, sensor responsiveness, hydraulic pressure stability, punching accuracy, cut length precision, and safety stops.
Trial Run: Test production using customer-specified raw material and profile drawings prior to final dispatch.
FAQ
What materials can this machine process?
It is suitable for processing PPGI, galvanized steel (GI), and aluminum coils with consistent forming performance.
What is the production speed of the machine?
The forming speed is typically 15–25 m/min, depending on profile design and material thickness.
Can the machine produce different panel widths?
Yes, dual-size or customized profile designs are available according to project requirements.
Is the machine fully automatic?
Yes, it is controlled by a PLC system with automatic forming and hydraulic cutting for easy operation.
Do you provide installation and training?
Yes, we provide installation guidance, operation training, and remote technical support for all customers.
Can the production line be customized?
Yes, complete roll forming lines can be designed based on customer requirements, including decoiler, forming unit, cutting system, and stacking system.
Hot Tags: double-layer roof panel roll forming machine, China double-layer roof panel roll forming machine manufacturers, suppliers, factory, Double Layer Forming Machine, Double Layer Roofing Sheet Roll Forming Machine, metal roof seamer machine, roof panel curving machine, standing seam roof panel machine, tile roll forming machine






