Introduction
CM250 C Purlin Machine: Compact Design, High-Power Output
TACON manufactured automatic CM250 C Purlin Machine(also known as C purlin roll forming machine or C shaped steel purlin roll forming machine), it can produce various specifications of C-shaped purlins with widths ranging from 50 to 250 mm and thicknesses within the range of 1.0 to 2.5 mm.
What sets it apart?
Its portability and space efficiency. Compact enough to fit in medium-sized workshops, yet robust enough for on-site production, it lets you deliver purlins directly to the job site-cutting transportation costs and reducing material damage. Plus, the durable GCr15 steel rollers (heat-treated and galvanized) ensure long-term reliability, even with non-stop daily use.
For contractors and manufacturers who need versatility without sacrificing performance, this is the purlin machine that does it all.
Key features
① Automatic Dimension Adjustment
• Eliminates Roller/Spacer Replacement: Enables infinite dimensional customization for C-section purlins (within the machine's operational range), eliminating the need for frequent accessory changes and streamlining production transitions.
• Optional Punching Capability: Allows hole drilling at any desired location on the purlin's web or flange, providing enhanced flexibility to meet diverse installation and connection requirements.
② High-Efficiency Production & Low Maintenance
• PLC Automated Control: A production speed of 8-15 meters per minute, minimizing manual intervention, reducing errors, and boosting overall throughput.
• 16-Stand Forming Unit: Integrates CR12 tool steel cutting blades, which deliver exceptional precision in forming and long-term durability-effectively lowering maintenance frequency and operational costs.
③ Material Versatility
• Compatible with Multiple Steel Types: Supports processing of Galvanized Steel (GI), Cold-Rolled Steel (CRC), Hot-Rolled Steel, and other common steel materials, adapting to varying performance demands across different construction scenarios.
• Broad Material Parameter Range: Accommodates steel materials with a thickness of 1.2-2.5mm and a yield strength of 245-550MPa, covering the material specifications required for most industrial C-section purlin applications.
④ Modular Design
• Optional Manual/Hydraulic Decoiler: Offers a choice between manual or hydraulic decoilers, allowing flexible selection based on production scale and automation needs.
• Industrial On-Site Installation Ready: Boasts transport dimensions of 8m×1.4m×1.6m; its compact and rational structure ensures easy integration into various industrial site layouts and installation environments.
Technical parameters
|
NO. |
ITEM |
SPECIFICATION |
|
1 |
The Total Demension |
(length)8.0m x (width)1.4m x (height)1.6m |
|
2 |
Weight |
6T |
|
3 |
Material |
Cold rolled coil, Hot rolled coil, Galvanized |
|
4 |
Purlin Specification |
Width: 50-250 Flange: 25-60mm Lip: 10-20mm Thickness:1.0-2.5mm |
|
5 |
Main Motor Type: |
Frequency Motor or Servo motor |
|
6 |
Motor Power |
15KW |
|
7 |
Drive |
Chain |
|
8 |
Main Roller Station |
16 Groups Rollers |
Profile Drawing
Machine Components
Flow chart
Manual Decoiler→ Feed And Leveling Device→ Hydraulic Punching and Cutting→ Roll Forming Machine→ Post cutting→ Product Support Frame
Product detail
1) Decoiler
●Tightening of coil: By Manual
●Weight capacity of decoiler : 4.0T
●Inner diameter of decoiler: 380-550mm
●Max outer diameter of decoiler: 1200mm
2) Feeding and Leveling Device
●It used for making the material flat before feeding into the roll forming machine
●7 rollers (three upper and four lower)
3) Hydraulic punching and Hydraulic Cutting
● Punching Type: Hydraulic Punching
● Punching sizes and no.: 2 punching units
●Punching Type: Hydraulic Punching
●Cutting type: Hydraulic cutting
●Cutting material: Cr12MoV
●Hydraulic motor power: 7.5KW
●Hydraulic Pressure: 12-20Mpa
●Hydraulic cooling system by fan
4) Rolling Forming System
●Peed of forming: 8-15m/min
●Material of roller : Cr12
●Motor for width adjusting: 2.25KW(0.75KW*3)
●Material of main shaft : 40Cr (The main shaft have the high frequency grinding &heat Treatment and the surface of shaft is chroming
●Diameter of main shaft: ø65-70mm
5) Post Cutting
● From can be adjustable within 70-200mm
6)Product support frame
The length of product support frame : 6m
7) PLC Control System
●Control the quantity &punching length& cutting length automatically
●Voltage: 415V, 3 Phase 50Hz
Hot Tags: c purlin machine, China c purlin machine manufacturers, suppliers, factory, C Purlin Machine, C Purlin Roll Forming Machine, c u purlin roll forming machine